Связанные продукты
DGS-FM-5A model automatic FM200 filling machine
Solution A (DGS-FM-5A) added the sensors, electromagnetic valve, vacuum pump, and the electronic scale based on solution B (manual control),it is automatic control mode
◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
◪ Electric scale range:0-500kg（there is also max 1000kg for optional）
DGS-DGGD16 model liquid CO2 filling equipment
◪ The CO2 Fire Extinguisher filling equipment including following parts:
◪ Air–driven liquid CO2 gas booster pump
◪ Stainless steel material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’special requirement.
Model | Pressure Ratio | Driven air pressure PL | Formula to calculate outlet pressure | MAX Outlet | Driven | High pressure Outlet port | MAX Flow |
DGS-DGG16 | 16:1 | 3-8 bar | 16XPL | 128 | G 1/2 | NPT/ZG | 12.42 |
DGS-DGG28 | 28:1 | 3-8 bar | 28XPL | 224 | G 1/2 | NPT/ZG | 7.11 |
DGS-DGGD166 | 16:1 | 3-8 bar | 16XPL | 128 | G 1/2 | NPT/ZG | 19.73 |
DGS-DGGD28 | 28:1 | 3-8 bar | 28XPL | 224 | G 1/2 | NPT/ZG | 11.30 |
DGS-CO2-B model liquid CO2（fire extinguisher） filling machine
◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: CO2
◪ Max output pressure: 12.8Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Liquid CO2 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
Fire Extinguisher filling
video
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below: +86-18563940119
Copyright © 2025 Dongguan Suncenter Fluid Control Оборудование Co., Ltd. | Все права защищены
