lpg pump lpg type for safety valve calibration

latest_products

Ручное давление тестовые насосные инструкции

Гидравлический / гидроизоляционный насос для тестирования давления

Газовый цилиндр внешний измерительный тестируемый станок с куртками воды

Пневматический химический реагентный насос для впрыска

Информация о продукте
обратная связь

Company Advantages
1. Suncenter nitrogen pumping unit is highly recommended for its fine design. This product has a compact and robust design
2. Suncenter has been always paying close attention to the quality of the service. This product can be installed at any predetermined pressure
3. This product has a high electric safety level. During the production, it is thoroughly inspected for its insulation housing, overload protection system, and reliable electric conductors. Its output pressure can be easily adjustable
4. The product features an efficient retractable mechanism. The top and bottom rail of each panel incorporate an extruded aluminum mechanical seal to withstand the retracted or extended mode. The product can be mounted in any position

Compressed Air Driven Liquid Gas Booster Pump-DGG/DGGD Series

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:

Suncenter lpg lpg pump type for safety valve calibration-1

DGGD4 model special gas booster pump

Suncenter lpg lpg pump type for safety valve calibration-2

◪ Application: various kinds of liquefying gas such as LNG, LPG, butane, propane, DME, etc  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2bar-8 bar	4XPL	8bar-32bar	NPT1/2	NPT1/2	70.00

DGGD4 model LPG pump for cylinder transfer working picture

Suncenter lpg lpg pump type for safety valve calibration-3

◪ DGGD4 model LPG pump for cylinder transfer working picture 

We could also make it into a booster pump station:DGS-DGGD4

Suncenter lpg lpg pump type for safety valve calibration-4

◪ The standard system including following parts:
◪ DGGD4 model gas booster pump
◪ Stainless steel frame cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

DGS-DGGD4 =Suncenter booster pump(DGGD4)+following valves, gages, and parts

Suncenter lpg lpg pump type for safety valve calibration-5

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar 
※ No airline lubricator required 
※ Hydrocarbon free - separation between air and gas sections 
※ Pressures to 80Mpa (11,600 psi) 
※ Wide range of models with different ratios 
※ Built-in-cooling on most models 
※ Easy to install, operate and maintain 
※ Best price / performance ratio 
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant not be higher than 8 bar

video

Company Features
1. We are backed by state-of-the-art factory. It is equipped with carefully selected, advanced, and sophisticated machinery and equipment. It allows us to produce high-quality products.
2. Quality, innovation, hard work and zeal to excel remain the steering force behind our business. These values have led us to become a company with a powerful manufacturing hub for customers.

j******x

The production process of Suncenter nitrogen pumping unit has been greatly improved, from the bulb fabrication, lampshade surface treatment, performance testing, and assembly. This product is not susceptible to cracks

e******g

Suncenter nitrogen pumping unit is produced in line with lighting production standards. These standards are up to both domestic and international standards such as GB and IEC. This product can repeat the same measurement many times

i******h

Suncenter [lpg pump undergoes a series of the complicated production processes including washing, photoetching, stripping of photoresist and coating. It works stably under strong impact and vibration conditions

v******g

During the production of Suncenter nitrogen pumping unit, it is tested for both life and strength, which is performed at some independent testing facilities. It generates only little magnetic interference

p******m

Suncenter lpg pump is produced under standardized and scientific lighting standards. For example, the selection process of the light source highly meet the international lighting standards. It works stably under strong impact and vibration conditions

w******r

The product will also undergo strict tests before delivery. These ongoing tests including an internal test and external test can achieve the superiority of the product. This product features a frequency response property

Сообщение о продукте

*Имя

Телефон

*Электронной почты

*Содержание