easy to use hydrostatic pressure test booster bulk production for pressurization

Company Advantages
1. The design of Suncenter gas booster system is done under advanced technologies. It is carried out using photorealistic rendering 3D technology which vividly reflects the furniture layout and space integration. This product can be installed at any predetermined pressure
2. Suncenter has obtained quality certificates of gas booster system for its hydrostatic pressure test . The product is suitable for most liquids and liquefied gases
3. This product has no wrinkles. The treated fibers have high elasticity and strong friction resistance to maintain the shape of the fabric. Its output pressure can be easily adjustable

Gas booster pump system

Suncenter - Gas booster systems are compact and delicacy solution tailored to customer specific requirements with gas boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Suncenter - Pneumatic booster system are used for oil free compression of clean shop air as well as industrial gases like Argon, Helium, Oxygen, Hydrogen and Nitrogen,CO2, etc..Driven air from 3 bar to 8 bar (from air compressor).

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

Suncenter DGS Series Pneumatic (Air driven) Gas Booster Pump System

easy to use hydrostatic pressure test booster bulk production for pressurization-1

DGS booster system = booster pump+ following valves, gages, and parts

easy to use hydrostatic pressure test booster bulk production for pressurization-2

The hottest selling- model A and model C cabinet picture

easy to use hydrostatic pressure test booster bulk production for pressurization-3

◪ The standard gas booster pumps system including following parts:
◪ Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2：1	1.0	16	16	2bar-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5：1	0	40	40	2bar-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA06	6：1	2.0	48	48	2bar-8 bar	6XPL	1/2 / 1/2	360(at PA of 10 bar )
DGS-DGA10	10：1	3.5	80	80	2bar-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA15	15：1	3.5	120	120	2bar-8 bar	15XPL	3/8/ 3/8	190(at PA of 10 bar )
DGS-DGA25	25：1	7.0	200	200	2bar-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40：1	10	320	320	2bar-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60：1	20	480	480	2bar-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100：1	25	800	800	2bar-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )

Technical specification for DGS-DGD Series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	2bar-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD15	15:1	5	120	120	2bar-8 bar	15XPL+ PA	3/8/3/8	350 (at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	2bar-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	2bar-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	2bar-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	2bar-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )
DGS-DGD130	130:1	50	1040	1040	2bar-8 bar	130XPL+ PA	1/4/M14*1.5	180(at PA of 60 bar )

Technical specification for DGS-2DGD Series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-2DGD10	10:1	3	80	80	2bar-8 bar	10XPL+ PA	1/2 / 1/2	980(at PA of 6 bar )
DGS-2DGD25	25:1	6	200	200	2bar-8 bar	25XPL+ PA	3/8 / 3/8	560(at PA of 10 bar )
DGS-2DGD40	40:1	25	320	320	2bar-8 bar	40XPL+ PA	3/8 / 3/8	480(at PA of 40 bar )
DGS-2DGD60	60:1	30	480	480	2bar-8 bar	60XPL+ PA	3/8 / 3/8	320(at PA of 40 bar )

Technical specification for DGS-DGT Series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT15	15:1	0.1	56	120	2-8 bar	15XPL	3/8/ 1/4	230(at PA of 8 bar )
DGS-DGT25	25:1	0.1	10	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGS-DGT7/25	25:1	5	56	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGS-DGT40	40:1	0.1	10	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGS-DGT15/40	40:1	5	120	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGS-DGT60	60:1	0.1	10	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGS-DGT15/60	60:1	6	120	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	0.1	10	800	2-8 bar	100XPL	3/8/ 1/4	63(at PA of 8 bar )

Technical specification for DGS-2DGT series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-2DGT7/15	15:1	4	56	120	2bar-8 bar	15XPL	3/8 / 3/8	430(at PA of 10 bar )
DGS-2DGT7/25	25:1	5	56	200	2bar-8 bar	25XPL	3/8 / 3/8	300(at PA of 10 bar )
DGS-2DGT15/40	40:1	7	120	320	2bar-8 bar	40XPL	3/8 / 3/8	180(at PA of 10 bar )
DGS-2DGT15/60	60:1	7	120	480	2bar-8 bar	60XPL	3/8 / 3/8	120(at PA of 10 bar )

easy to use hydrostatic pressure test booster bulk production for pressurization-4

easy to use hydrostatic pressure test booster bulk production for pressurization-5

◪ DGS series gas boosters working pictures

easy to use hydrostatic pressure test booster bulk production for pressurization-6

DGS-DGD40 gas booster system for nitrogen gas spring filling

easy to use hydrostatic pressure test booster bulk production for pressurization-7

DGS-DGT series gas boosters for gas cylinder transfer and filling

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd is a famous firm which specializes in hydrostatic pressure test . gas booster compressor is the driving force for the Suncenter's scientific and technological innovation and achieving development.
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd continues to develop new products to meet the needs of users in nitrogen pumps industry.
3. pressure booster pump is produced by good source of material. We pursue environmental protection in our business. We have maintained a high level of environmental awareness and have found ways to improve environmentally friendly production. Get an offer!

b******a

The on-site construction process of Suncenter gas booster compressor is conducted by skilled, experienced installing professionals who bring years of industry experience to each project. It helps minimize downtime and maximize operational efficiency

d******t

Suncenter nitrogen pumps is produced under standardized and scientific lighting standards. For example, the selection process of the light source highly meet the international lighting standards. Its materials include laser-cut steel, stainless steel, and aluminum

l******l

Suncenter nitrogen pumps goes through a series of sophisticated workmanship. The comminution and concentration of raw materials are carried out to provide a more concentrated material for the procedures of extractive metallurgy. It is designed to maximize capacity and evenly distribute the load

w******a

Suncenter gas booster system meets the regulatory requirements of the textile market. The textile fibers, dyestuff, and different kinds of agents used in it are guaranteed to meet the standards. It can be designed with the front bumper to minimize walkway damage

e******d

The manufacturing of Suncenter hydrostatic pressure test is carried out through the following processes: metal materials preparation, turning, milling, boring, welding, marking, and assembling. It can be designed with a brake system to prevent moving when not desired

b******m

The product can light up instantly. Its high-intensity illuminating elements can not only withstand the impact of instantaneous current but also enter the normal working state for the first time. Its material is antibacterial and inhibits the growth of pathogenic microorganisms

Сообщение о продукте

*Имя

Телефон

*Электронной почты

*Содержание